China High Quality Small Gearbox for Extruder and Transmission Gearbox worm gear box elecon

Solution Description

one) Modest volume
two) Large transmission torque
three) Higher performance
4) Minimal usage

Parameters :

Type Spec Input Energy
(kw)
N( enter) N(output) Output Torque Permitted axial thrust
of output shaft(KN)
Screw
Diameter
Length-diameter
ratio
(N@m)
ZLYJ 112-8 five.five 800 a hundred 525 35 Ø35 25:01:00
133-eight eight 800 one hundred 764 39 Ø50 twenty five:01:00
146-ten 11 a thousand a hundred 1050 54 Ø55 25:01:00
173-10 eighteen.5 900 90 1962 110 Ø65 twenty five:01:00
two hundred-12.5 thirty 1000 eighty 3581 one hundred fifty five Ø75 25:01:00
225-12.5 45 1000 eighty 5371 a hundred and eighty Ø90 25:01:00
250-16 fifty five 1120 70 7503 192 Ø105 twenty five:01:00
280-sixteen seventy five 960 60 7643 258 Ø110 twenty five:01:00
315-sixteen 85 960 sixty 13528 287 Ø120 25:01:00
330-sixteen one hundred ten 960 sixty 17507 360 Ø135 twenty five:01:00
375-sixteen 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 four hundred Ø160 twenty five:01:00
420-16 160 960 sixty 31831 430 Ø160 25:01:00
420-sixteen 220 960 sixty 31831 430 Ø170 25:01:00
450-twenty 213 1000 60 40640 five hundred Ø160/Ø170 twenty five:01:00
560-17 540 one thousand fifty 84034 seven-hundred Ø200 twenty five:01:00
630-10 540 1000 50 15712 770 Ø250 25:01:00

ZLYJ gearbox collection are transmission devices, which are specifically developed for solitary-screw extruder with large precision, hard equipment surface, accompany with thrust. Adopting the specialized requirements stipulated in JB/T9050.1-1999, all CZPT gearboxes are created accordingly.
Primary Functions:
1. The materials of gear is the high energy alloy steel, it is manufactured by carburizing, quenching (and other warmth treatment method), gringding approach at last. The equipment is in high precison ( 6 grade ) and substantial hardness ( reaches HRC54-sixty two). Apart from, it functions reduced sound when working.
2. It includes high bearing ability thrust, which is executed reliable and can face up to greater axial thrust.
3. All the items are treated by pressured lubrication and cooling method except quite couple of little specification merchandise.
four. CZPT sequence gearbox is adopted by six-aspect processing box. Its typical installation is horizontal, but can also be transformed to vertical installation in accordance to customer’s requirment.
five. Effectiveness transmission, reduced noise, extended operaton time.
Deal

Packing for screw and barrel
1) Wood scenario bundle
2) Plastic film deal
three) Appropriate to transportation

Why select us?
A> long time expertise and background
B> extended time nitriding treatment method and heating remedy by itself
C>advanced Fanuk collection CNC pc-managed milling machines
D>depth gap drilling equipment in 8meters duration, which make certain the straigtnss of barrel inside of.
E> CAD drawing affirmation prior to begin generating
F> Prompt right after sale provider

About us:

ZHangZhoug pinbo plastic machinery co.,ltd is located in HangZhou HangZhou city with brand of PYM(Former HangZhou yumin machine screw co.ltd since 1988). The company is specialized in making screw barrel, gearbox zlyj series, t die, filter and extruder machine. It has become one of the largest supplier of main parts in HangZhou city which 
is the basement of plastic machines. 
If there is any issue, you can speak to with us at any time, we will reply you as soon as attainable!

US $400-5,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Reducer
Function: Speed Reduction
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless

###

Customization:

###

Type Spec Input Power
(kw)
N( enter) N(output) Output Torque Permitted axial thrust
of output shaft(KN)
Screw
Diameter
Length-diameter
ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00
US $400-5,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Reducer
Function: Speed Reduction
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless

###

Customization:

###

Type Spec Input Power
(kw)
N( enter) N(output) Output Torque Permitted axial thrust
of output shaft(KN)
Screw
Diameter
Length-diameter
ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

Worm gear reducer gearbox

A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
worm reducer

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm reducer

application

The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China High Quality Small Gearbox for Extruder and Transmission Gearbox     worm gear box eleconChina High Quality Small Gearbox for Extruder and Transmission Gearbox     worm gear box elecon
editor by czh 2023-01-15