worm motor

Worm get gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque result is required. Great for student based tasks which includes robots and buggies.
The machine has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The engine is snap fitted into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where great torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, even at suprisingly low voltages. We recommend that you use stall-detection sensors, or just look at your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not particularly designed to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors set new criteria for reliability, performance and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration today and a future proof option. The Ever-Power gear electric motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange alternatives. The electric motor terminal box could be mounted in option positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total answer for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the option for applications requiring a corner turn, optional dual output, or perhaps an inability for the engine to be back again driven. The DC correct angle gear motors are made for continuous and intermittent duty procedure. Our right angle gear reducers were created with several mounting plate options, making them ideal for a number of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision trim gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chair / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Motor that will optimize the functionality of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Lower / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor uses a metal gear box for toughness and a high torque output. Due to the special mechanical framework of the worm get the motor output shaft is definitely self locking and will not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their power in applications where superior gear ratios are essential. Our worm geared motors happen to be for that reason optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear products impress with their large power density and small style. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These could be easily field set up, but we may also be happy to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear devices feature a clean, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product preferably suited for harsh and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides numerous fixing possibilities and enable an easy assembling for the customer.
Additional drive configurationscan be created by use of built-in accessories (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Engine attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load quickness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a good robust worm get gearbox powered by an MM28 motor (included), most ideal for applications where a simple to match, high torque productivity is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most suitable for applications where an easy to match, high torque result is required
Ideal for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that’s, regarding motor without electrical, the outcome axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a much better option when compared to spur gear motor. How come worm gear so special? Take a look wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the increased friction involved between your worm and worm-wheel, when usually a single start (one spiral) worm is used. This can be an advantage when it is desired to eliminate any possibility of the result driving the input.”
In other words, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Please contact us if you would certainly like to find out more about worm motor.