Tag Archives: helical worm gearbox

China Cast Iron Material Helical Worm Gearbox for Power Transmission Industrial Machines agnee worm gearbox

Merchandise Description

Solution Description

Solution Description

-S Series Helical gearbox

Product Functions
1.High modular design and style.
2.Integrated casting housing,compact dimension,high loading assistance, steady transmitting and reduced sound stage.
three.With the unique equipment geometry, it receives large torque, efficiency and long lifestyle circle.
four.It can obtain the immediate combination for 2 sets of gearbox.
5.Large performance and help save electricity.

six.Preserve cost and reduced maintenance.

Solution Parameters

one. Technical data

Size	38	forty eight	58	68	seventy eight	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	.eighteen~.75	.eighteen~1.five	.18~3	.25~5.five	.fifty five~7.5	.75~fifteen	one.5~22
Ratio	ten.27~165.seventy one	11.46~244.seventy four	ten.seventy eight~196.21	11.fifty five~227.20	9.ninety six~241.09	11.83~223.26	12.seventy five~230.forty eight
Permissible Torque(N.m)	ninety	one hundred seventy	300	520	1270	2280	4000
Bodyweight(kg)	seven	ten	14	26	fifty	one hundred	a hundred and seventy

two: Design alternative

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Quick-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

Materials Knowledge Sheet

Housing content	Grey Cast iron
Housing hardness	HBS163~255
Equipment substance	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~sixty two °
Equipment core hardness	HRC33~forty eight
Enter / Output shaft content	40Cr alloy steel
Enter / Output shaft hardness	HRC32~36
Machining precision of gears	precise grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment method	tempering, cementiting, quenching, normalizing, etc.
Effectiveness	94%~ninety six% (is dependent on the transmission phase)
Sound (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Manufacturer of bearings	China prime brand name bearing, HRB/LYC/ZWZ/C&U. Or other makes asked for, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — ZheJiang or other makes asked for

Thorough Pictures

Our method of generation

Our merchandise line

Business Profile

Business Profile

Bode was started in 2007, which is situated in HangZhou metropolis, ZHangZhoug province. As 1 professional producer and exporter, we have much more than seventeen years’ experience in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare components. We have factory with superior generation and examination tools, the sturdy advancement of crew and creating capability supply our buyers with substantial good quality goods. Our items broadly served to a variety of industries of Metallurgy, Chemical compounds, lifting, mining, Petroleum, textile, medicine, picket and so forth. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to question us any inquiries, great supply always for you for lengthy phrase business.

FAQ

Q1: Are you buying and selling company or maker?
A: We are manufacturing facility.

Q2: What varieties of gearbox can you generate for us?
A: Principal items of our business: R, S, K, F collection helical-tooth reducer, RV collection worm equipment reducer,H Sequence Parallel Shaft Helical Reduction Equipment Box

Q3: Can you make as for each custom made drawing?
A: Yes, we offer personalized services for customers.

Q4: Can we buy 1 pc of every merchandise for good quality screening?
A: Indeed, we are happy to settle for trial order for quality screening.

Q5: What data shall we give prior to placing a obtain get?
A: a) Type of the gearbox, ratio, enter and output type, input flange, mounting place, and motor informationetc.
b) Housing color.
c) Obtain quantity.
d) Other specific specifications.

Q6: How extended is your shipping and delivery time?
A: Normally it is 5-10 days if the goods are in inventory. or it is 15-20 times if the items are not in inventory.

Q7: What is your phrases of payment ?
A: 30% Progress payment by T/T following signing the contract.70% ahead of supply

If you are interested in our solution, welcome to speak to with us.
Our team will do our greatest to meet your require 🙂

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China Cast Iron Material Helical Worm Gearbox for Power Transmission Industrial Machines agnee worm gearbox
editor by czh 2023-01-30

China S Series Helical Worm and Wormwheel Hlical Gearbox with Good quality

Item Description

Solution Description

Solution Description

-S Collection Helical gearbox

Item Features
one.Higher modular style.
two.Integrated casting housing,compact dimension,high loading assist, stable transmitting and lower sound degree.
three.With the particular equipment geometry, it will get large torque, effectiveness and prolonged lifestyle circle.
four.It can accomplish the immediate combination for 2 sets of gearbox.
5.Substantial effectiveness and conserve electricity.

6.Save cost and minimal upkeep.

Product Parameters

one. Technical data

Dimension	38	48	58	sixty eight	seventy eight	88	ninety eight
Framework	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	.eighteen~.seventy five	.eighteen~1.5	.eighteen~3	.twenty five~5.five	.fifty five~7.five	.seventy five~15	1.5~22
Ratio	10.27~a hundred sixty five.71	11.forty six~244.seventy four	10.78~196.21	11.55~227.twenty	9.ninety six~241.09	11.eighty three~223.26	12.seventy five~230.forty eight
Permissible Torque(N.m)	90	one hundred seventy	300	520	1270	2280	4000
Fat(kg)	seven	ten	fourteen	26	50	a hundred	one hundred seventy

two: Layout option

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Brief-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

Supplies Info Sheet

Housing materials	Grey Solid iron
Housing hardness	HBS163~255
Equipment content	20CrMnTi alloy metal
Area hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~forty eight
Enter / Output shaft substance	40Cr alloy steel
Enter / Output shaft hardness	HRC32~36
Machining precision of gears	exact grinding, 6~5 Quality
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment method	tempering, cementiting, quenching, normalizing, and many others.
Effectiveness	ninety four%~ninety six% (is dependent on the transmission phase)
Noise (MAX)	sixty~68dB
Temp. rise (MAX)	40°C
Temp. increase (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand name of bearings	China best model bearing, HRB/LYC/ZWZ/C&U. Or other brand names asked for, SKF, FAG, INA, NSK.
Brand name of oil seal	NAK — ZheJiang or other makes asked for

Comprehensive Photographs

Our procedure of generation

Our solution line

Organization Profile

Organization Profile

Bode was launched in 2007, which is situated in HangZhou metropolis, ZHangZhoug province. As 1 expert company and exporter, we have a lot more than seventeen years’ knowledge in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare areas. We have manufacturing facility with superior manufacturing and examination tools, the powerful advancement of group and producing capacity offer our clients with substantial good quality goods. Our items extensively served to numerous industries of Metallurgy, Chemical substances, lifting, mining, Petroleum, textile, medicine, picket etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to inquire us any queries, excellent supply constantly for you for prolonged expression enterprise.

FAQ

Q1: Are you investing organization or producer?
A: We are factory.

Q2: What types of gearbox can you create for us?
A: Principal products of our business: R, S, K, F collection helical-tooth reducer, RV series worm equipment reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for every personalized drawing?
A: Indeed, we supply personalized provider for buyers.

This autumn: Can we get 1 pc of each item for quality testing?
A: Of course, we are happy to accept trial order for high quality screening.

Q5: What info shall we give ahead of placing a purchase order?
A: a) Sort of the gearbox, ratio, enter and output type, enter flange, mounting position, and motor informationetc.
b) Housing coloration.
c) Acquire quantity.
d) Other particular demands.

Q6: How long is your supply time?
A: Generally it is 5-ten days if the items are in stock. or it is fifteen-20 times if the goods are not in inventory.

Q7: What is your phrases of payment ?
A: thirty% Advance payment by T/T after signing the deal.70% ahead of delivery

If you are fascinated in our product, welcome to make contact with with us.
Our group will do our greatest to satisfy your need to have 🙂

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
worm reducer

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducer AGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducer AGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China S Series Helical Worm and Wormwheel Hlical Gearbox with Good quality
editor by czh 2023-01-28

China Hollow Shaft Solid Shaft Helical Worm Gearbox Motor with Great quality

Solution Description

NMRV worm gearbox motor

NMRV collection worm equipment reducer:
Its structure,define and set up proportions as nicely as performance are identical with that of
Europe an products,they are interchangeable,and the materials and machining method are superior internationally.The product is highlighted by:
1.Lower noise and temperature increase.
2.Substantial bearing capability,sleek run and lengthy service existence.
three.ompact composition,samll volume,mild excess weight,beautiful shape and straightforward to install.
four.Can run repeatedly under server setting,and has a very good reliability.

GPHQ NMRV aluminum worm gearbox motor specifics:

Sort	GPHQ NMRV Worm Equipment Velocity Reducer /gearbox motor
Product:	NMRV25/30/ forty/ 50/ sixty three/ 75/ 90/110/one hundred thirty/one hundred fifty
Enter Electrical power:	.06KW,.09KW,.12KW,.18KW,.22KW,.25KW,.37KW,.55KW,.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW
IEC Flange	56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 132B5,160B5
Ratio	one: 7.5,ten,15,20,25,thirty,40,fifty,sixty,eighty,a hundred
Material	Housing: Die-Solid Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150
	Worm Gear-brass+forged iron
	Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
	Shaft-chromium steel-forty five#
Color:	Blue/Silver Or other folks if quantity is large
Packing:	Carton or plywood Case
Ensure time :	1 Yr apart from other than Gentleman-manufactured destruction
Usages:	Industrial Equipment: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft:	output sound shaft or output hollow shaft

FAQ
one, Q:what is actually your MOQ for ac gearbox motor ?
A: 1pc is alright for every single kind electrical gear box motor

two, Q: What about your warranty for your induction speed reducer motor ?
A: 1 year ,but apart from man-created ruined

three, Q: which payment way you can take ?
A: TT, western union .

4, Q: how about your payment way ?
A: a hundred%payment in innovative much less $5000 ,30% payment in superior payment , 70% payment before sending above $5000.

five, Q: how about your packing of pace reduction motor ?
A: plywood case ,if size is small ,we will pack with pallet for much less 1 container

6, Q: What information must be given, if I buy electric helical geared motor from you ?
A: rated electrical power, ratio or output speed,sort ,voltage , mounting way , amount , if far more is much better.

US $30-200
/ Piece
| 5 Pieces

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Step:	Single-Step
Motor Power:	0.09kw-15kw
Voltage:	380V ( Also Done as Your Need)

###

Customization:	Available \| Customized Request

###

Type	GPHQ NMRV Worm Gear Speed Reducer /gearbox motor
Model:	NMRV25/30/ 40/ 50/ 63/ 75/ 90/110/130/150
Input Power:	0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW,0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW
IEC Flange	56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 132B5,160B5
Ratio	1: 7.5,10,15,20,25,30,40,50,60,80,100
Material	Housing: Die-Cast Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150
	Worm Gear-brass+cast iron
	Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
	Shaft-chromium steel-45#
Color:	Blue/Silver Or others if quantity is big
Packing:	Carton or plywood Case
Guarantee time :	1 Year except except Man-made destruction
Usages:	Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft:	output solid shaft or output hollow shaft

US $30-200
/ Piece
| 5 Pieces

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Step:	Single-Step
Motor Power:	0.09kw-15kw
Voltage:	380V ( Also Done as Your Need)

###

Customization:	Available \| Customized Request

###

Type	GPHQ NMRV Worm Gear Speed Reducer /gearbox motor
Model:	NMRV25/30/ 40/ 50/ 63/ 75/ 90/110/130/150
Input Power:	0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW,0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW
IEC Flange	56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 132B5,160B5
Ratio	1: 7.5,10,15,20,25,30,40,50,60,80,100
Material	Housing: Die-Cast Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150
	Worm Gear-brass+cast iron
	Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
	Shaft-chromium steel-45#
Color:	Blue/Silver Or others if quantity is big
Packing:	Carton or plywood Case
Guarantee time :	1 Year except except Man-made destruction
Usages:	Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft:	output solid shaft or output hollow shaft

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
worm reducer

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm reducer

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Hollow Shaft Solid Shaft Helical Worm Gearbox Motor with Great quality
editor by czh 2023-01-23

China CNC Precise Machining Aluminum Helical Gear Box, Helical Gear System bevel vs worm gearbox

Solution Description

CNC exact machining aluminum helical equipment box, helical gear technique

We have widely selection of layout and manufacturing such as customized cnc machining, cnc
machined parts, non-common device parts, machined casting areas and precision turned
elements that the materials of hardware areas are in steel, stainless steel, brass, aluminum
and plastic. In addition, we specialized in precision parts and parts machining to
provide the electronics, automotive elements, astronautical parts, medical appliances and hand
resource industries.
if you have particular prerequisite about the components content, tolerance, procedure, therapy,
products or test, this sort of as seamless copper fin tubing, aluminum alloy 535 casting, and
glass-lined alloy casting, unique paint portray, 5 axis centers, 3D Coordinate
Measurement Devices (CMM) check … just feel free to speak to us, we will attempt our ideal to
satisfy the demands of you.

Area: As your necessity
Substance: Steel / aluminum / brass / iron / zinc / alloy
Any other substance and dimension is dependent on customers’ demand from customers.

Usage: Machinery / home furniture / toy / woodboard / wall
Producing method: Stamping parts
Euipment: CNC Machining equipment
Tests tools: Projector

Sector Focus Appliance/ Automotive/ Agricultural Electronics/ Industrial/ Marine Mining/ Hydraulics/ Valves Oil and Gas/ Electrical/ Development
Business Specifications ISO 9001: 2008 PPAP RoHS Compliant

Further Abilities CAD Style Solutions CAM Programming Companies Coordinate Measuring Equipment (CMM) Reverse Engineering

Specification	customized made
Material	Stainless steel, copper, brass, carbon metal, aluminum (according to customer’s necessity.
Surface Treatment	Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the warmth disposing, very hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing and many others.
Primary Merchandise	Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,equipment, stamping parts,washer,gasket, plastic molding injection areas, standoff,CNC machining provider,accessories etc.
Making Tools	CNC device , computerized lathe equipment,stamping equipment,CNC milling equipment,rolling machine,lasering,tag grinding device etc.
Management Method	ISO9001 – 2008
Obtainable Certificate	RoHS, SGS, Content Certification
Tests Tools	Projecting equipment, Salt Spray Take a look at, Durometer, and Coating thickness tester , Second projector
Lead time	10-15 operating times as common,It will dependent on the thorough order amount.
Controlling Returned Merchandise	With top quality problem or deviation from drawings
Shipping of Samples	By DHL,Fedex,UPS, TNT,EMS^^
Warranty	Replacement at all our price for turned down merchandise
Major Marketplaces	North The us, South The united states, Japanese Europe , West Europe , North Europe, South Europe, Asia
How to get	* You send out us drawing or sample
	* We have through task evaluation
	* We give you our layout for your affirmation
	* We make the sample and deliver it to you right after you confirmed our design and style
	* You affirm the sample then place an purchase and pay out us 30% deposit
	* We begin making
	* When the goods is accomplished, you pay us the balance following you confirmed photographs or tracking figures.
	* Trade is completed, thank you!!
Programs	Toy,Automotive, instrument, electrical gear, house appliances, furniture, mechanical tools, daily dwelling tools, electronic sporting activities gear, light sector products, sanitation machinery, marketplace/ hotel equipment materials, artware and so on.

US $0.3
/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Electric Cars, Motorcycle, Car
Function:	Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Stepless

###

Customization:	Available \| Customized Request

###

Specification	custom made
Material	Stainless steel, copper, brass, carbon steel, aluminum (according to customer’s requirement.
Surface Treatment	Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc.
Main Products	Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,gear, stamping parts,washer,gasket, plastic molding injection parts, standoff,CNC machining service,accessories etc.
Producing Equipment	CNC machine , automatic lathe machine,stamping machine,CNC milling machine,rolling machine,lasering,tag grinding machine etc.
Management System	ISO9001 – 2008
Available Certificate	RoHS, SGS, Material Certification
Testing Equipment	Projecting apparatus, Salt Spray Test, Durometer, and Coating thickness tester , 2D projector
Lead time	10-15 working days as usual,It will based on the detailed order quantity.
Managing Returned Goods	With quality problem or deviation from drawings
Delivery of Samples	By DHL,Fedex,UPS, TNT,EMS^^
Warranty	Replacement at all our cost for rejected products
Main Markets	North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia
How to order	* You send us drawing or sample
	* We carry through project assessment
	* We give you our design for your confirmation
	* We make the sample and send it to you after you confirmed our design
	* You confirm the sample then place an order and pay us 30% deposit
	* We start producing
	* When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers.
	* Trade is done, thank you!!
Applications	Toy,Automotive, instrument, electrical equipment, household appliances, furniture, mechanical equipment, daily living equipment, electronic sports equipment, light industry products, sanitation machinery, market/ hotel equipment supplies, artware etc.

US $0.3
/ Piece
| 100 Pieces

(Min. Order)

###

Application:	Electric Cars, Motorcycle, Car
Function:	Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Stepless

###

Customization:	Available \| Customized Request

###

Specification	custom made
Material	Stainless steel, copper, brass, carbon steel, aluminum (according to customer’s requirement.
Surface Treatment	Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc.
Main Products	Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,gear, stamping parts,washer,gasket, plastic molding injection parts, standoff,CNC machining service,accessories etc.
Producing Equipment	CNC machine , automatic lathe machine,stamping machine,CNC milling machine,rolling machine,lasering,tag grinding machine etc.
Management System	ISO9001 – 2008
Available Certificate	RoHS, SGS, Material Certification
Testing Equipment	Projecting apparatus, Salt Spray Test, Durometer, and Coating thickness tester , 2D projector
Lead time	10-15 working days as usual,It will based on the detailed order quantity.
Managing Returned Goods	With quality problem or deviation from drawings
Delivery of Samples	By DHL,Fedex,UPS, TNT,EMS^^
Warranty	Replacement at all our cost for rejected products
Main Markets	North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia
How to order	* You send us drawing or sample
	* We carry through project assessment
	* We give you our design for your confirmation
	* We make the sample and send it to you after you confirmed our design
	* You confirm the sample then place an order and pay us 30% deposit
	* We start producing
	* When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers.
	* Trade is done, thank you!!
Applications	Toy,Automotive, instrument, electrical equipment, household appliances, furniture, mechanical equipment, daily living equipment, electronic sports equipment, light industry products, sanitation machinery, market/ hotel equipment supplies, artware etc.

A-Drive PWC single worm reducer gearbox

Agknx driver

China CNC Precise Machining Aluminum Helical Gear Box, Helical Gear System bevel vs worm gearbox
editor by czh 2023-01-18

China Good Quality 90 Degree S Series Helical Worm Gearbox small worm gearbox

Solution Description

Item Description

Product Description

-S Sequence Helical gearbox

Product Characteristics
one.Large modular style.
2.Built-in casting housing,compact dimension,high loading help, stable transmitting and low sounds degree.
3.With the particular equipment geometry, it gets large torque, performance and long life circle.
4.It can achieve the direct mix for 2 sets of gearbox.
five.Higher effectiveness and conserve energy.

6.Save cost and reduced routine maintenance.

Merchandise Parameters

one. Technical data

Dimension	38	forty eight	58	sixty eight	seventy eight	88	98
Construction	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	.eighteen~.seventy five	.18~1.5	.18~three	.25~5.5	.fifty five~7.five	.seventy five~fifteen	one.5~22
Ratio	ten.27~a hundred sixty five.71	eleven.forty six~244.74	ten.seventy eight~196.21	eleven.55~227.twenty	nine.ninety six~241.09	eleven.eighty three~223.26	twelve.seventy five~230.48
Permissible Torque(N.m)	ninety	one hundred seventy	three hundred	520	1270	2280	4000
Bodyweight(kg)	seven	10	fourteen	26	fifty	100	170

2: Design alternative

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Quick-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

Supplies Data Sheet

Housing content	Grey Solid iron
Housing hardness	HBS163~255
Equipment materials	20CrMnTi alloy metal
Surface hardness of gears	HRC58°~sixty two °
Equipment main hardness	HRC33~forty eight
Input / Output shaft substance	40Cr alloy metal
Input / Output shaft hardness	HRC32~36
Machining precision of gears	exact grinding, 6~5 Quality
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat therapy	tempering, cementiting, quenching, normalizing, and so on.
Performance	94%~ninety six% (is dependent on the transmission phase)
Sound (MAX)	60~68dB
Temp. increase (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Manufacturer of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — ZheJiang or other brands asked for

Thorough Pictures

Our method of creation

Our product line

Business Profile

Firm Profile

Bode was launched in 2007, which is located in HangZhou metropolis, ZHangZhoug province. As 1 skilled company and exporter, we have a lot more than 17 years’ encounter in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have manufacturing unit with advanced creation and test products, the strong improvement of staff and producing ability provide our clients with high good quality items. Our merchandise broadly served to various industries of Metallurgy, Chemical compounds, lifting, mining, Petroleum, textile, drugs, wood and many others. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to inquire us any queries, excellent supply usually for you for lengthy term enterprise.

FAQ

Q1: Are you investing firm or company?
A: We are manufacturing facility.

Q2: What varieties of gearbox can you create for us?
A: Principal products of our organization: R, S, K, F collection helical-tooth reducer, RV series worm equipment reducer,H Sequence Parallel Shaft Helical Reduction Equipment Box

Q3: Can you make as for each custom drawing?
A: Yes, we provide customized services for clients.

This autumn: Can we get 1 personal computer of each item for good quality tests?
A: Yes, we are happy to take demo purchase for quality tests.

Q5: What details shall we give just before putting a obtain purchase?
A: a) Type of the gearbox, ratio, enter and output sort, enter flange, mounting placement, and motor informationetc.
b) Housing coloration.
c) Obtain quantity.
d) Other unique specifications.

Q6: How lengthy is your supply time?
A: Typically it is 5-ten times if the products are in inventory. or it is fifteen-twenty days if the products are not in stock.

Q7: What is your phrases of payment ?
A: thirty% Progress payment by T/T following signing the deal.70% before shipping and delivery

If you are interested in our product, welcome to contact with us.
Our crew will do our best to satisfy your need to have 🙂

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

Worm reducer gearbox – What You Need to Know

When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm reducer

Cost

Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
worm reducer

Worm gear reducer gearbox oil

Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China Good Quality 90 Degree S Series Helical Worm Gearbox small worm gearbox
editor by czh 2023-01-14

China S37-S97 Helical Worm Gearbox helical worm gearbox

Merchandise Description

S series Helical- Worm Geared Reducer with Motor

1. Product attributes

1.1. S series: appropriate-angle speed reduction gearing composed by helical gears, worms, and gears, optimized and created in accordance to global common

1.2.Higher precision, higher performance, fine classification in transmission ratio, extensive selection, large transmission torque, reputable performance, lower sound, flexible set up, and handy use and upkeep.

one.3. They are commonly utilised in a variety of minimal-velocity transmissions, which are common basic areas of mechanical transmission.

two. Technological parameters

Housing material	Solid iron
Housing hardness	HBS90-240
Gear substance:	20CrMnTi
Surface area hardnesss of gear	HRC58°-62°
Equipment main hardness	HRC33°-40°
Enter/Output shaft material	40CrMnTi
Input/Output shaft hardness	HBS241°-286°
Shaft at oil seal postion hardness	HRC48 ° -55 °
Machining precision of gears material	Correct grinding 6-5 quality
Warmth treatment	tempering, cementing, quenching etc
Performance	up to 90%
Noise(Max)	sixty-68dB
Unit product	Foot mounted,flange mounted,hollow shaft mounted
Input technique	flange enter,inline enter,shaft input
Vibration	≤ 20um
Backlash	≤ 20Arcmin
Bearing manufacturers	NSK,C&U and many others
Oil seal brands	NAK, etc
Lubricant	VG680
Motor	IP55, F class
Motor shaft	40Cr, Tempering, cementing,quenching and many others.

3.Apps

HangZhou XG Transmission Gearbox reducer are widely utilised in :
Ceramic Sector
Glass Market
Meals Business
Metallurgy Business
Beer& Drink Sector
Printing and dyeing Industry
Textile Market
Warehouse Logoistics Industry
Wood functioning Equipment
environmental protection tools Business
Leather-based Sector
Pharmacy Industry

5.Company Details

ZheJiang CZPT Co.,Ltd,the predecessor was a state-owned army CZPT organization, was established in 1965. CZPT specializes in the comprehensive power transmission resolution for higher-conclude gear producing industries dependent on the aim of “Platform Merchandise, Application Layout and Specialist Service”.

Starshine have a strong specialized force with over 350 employees at current, including more than thirty engineering experts, thirty top quality inspectors, covering an location of 80000 square meters and varieties of innovative processing devices and tests equipments. We have a good foundation for the market application development and services of large-finish pace reducers & variators owning to the provincial engineering technology analysis middle,the lab of gear velocity reducers, and the foundation of modern day R&D.

Our primary items are R/S/K/F series helical geared motor, SNP sequence planetary gearboxes, SNKG series bevel-helical gearmotor, NCJ series gear motor, RV sequence worm gearboxes, JWB-X collection pace variators, B/JXJ sequence cycloidal gearboxes, XGK collection helical-hypoid Gearboxes, which extensively utilised in ceramic industry, glass industry, woodworking machinery , high voltage switch, meals & beverage, packaging & printing, Storage & logistics, hoisting & transportation facilities…etc , and CZPT technically provide the professional product & service for the medium and higher-conclude clients, and our gearboxes are greatest-selling in domestic, and even in overseas , such as in Europe, North The us, South America, Middle East, South Asia, Southeast Asia, Africa…etc.

In the potential , Starshine will maintain the creed of “serving buyer, diligence & simplicity, self-criticism, innovation, honesty, teamwork”, and the principle of “high quality creates worth” to focus on the customers’ needs and provide them the competitive transmission resolution and create worth for them consistently, and make a high-end products manufacturing sector and create a preferred model of replacing import merchandise and upgrading continuously for the stop customers.

Among Dynamic and Static, Simple is Amazing, let’s go ahead hand in hand and make a brilliant long term!

Our factory
1. 300 sets sophisticated processing equipment

2. “6S”Standardized Administration

Our Team

Specialized Group

Revenue Crew

Following Income Group

Exibition Present

2019 ASIA ceramics exhibition

2018 World of Industry Exhibition

High quality Assurance

Items 100% examination just before shipping and delivery

Handed ISO 9001: 2015 Certificate.

Our Certificates:
Handed ” ISO 9001 International Top quality System Certification”, “Intercontinental High quality Credit rating AAA++ Ceritifacte” , ” Swiss SGS Certification”, Legendary Brand in Chinese Electromechanical Sector”, “Well-known Brand name of ZheJiang Province”, “Non-public Scientific and Technological Organization in ZheJiang Province”, “National Large and New-tech Company”, “Top 50 in Chinese Gear Sector” “2011 HangZhou Engineering and Technological R&D Center” and so on.

Our provider

1. We give 12 months Guarantee.
two. We have 1000’s of gearbox reducers. From Input Electricity .06KW to 200KW, Ratio 1.3-289.74, Output pace -1095rpm and Output torque 1.4-62800Nm. They can meet your all various needs for various industries.
3. 24 hrs on-line services.
4. Rapidly delivry.
five. We offer E-catalog or Paper catalog,so you can decide on the design simply in accordance to your requirements
6. Welcome you arrive to our manufacturing facility to verify our items, we can assist you to e-book the resort or ticket.

FAQ

Q:Are you a trading company or maker?
A: We are company.

Q:Exactly where do you base?
A: We are in Xihu (West Lake) Dis. district, HangZhou, China.

Q:What varieties of gearbox can you generate for us?
A: R/S/K/F series helical geared motor, SNP series planetary gearboxes, SNKG series bevel-helical gearmotor, NCJ sequence gear motor, RV collection worm gearboxes, JWB-X sequence velocity variators, B/JXJ sequence cycloidal gearboxes, XGK series helical-hypoid Gearboxes

Q:What are the software of the gearbox?
A:Items are commonly utilised in ceramic, glass, foodstuff, metallurgy, beer & drink, printing and dyeing, textile, petrochemical engineering, warehouse logistics, wooden-functioning equipment, environmental safety gear, printing and packaging, pharmacy, and leather. Products are bought in some countries and areas, such as Europe, The usa, and Southeast Asia, and it possesses dozens of distributors and following-sale provider brokers.

Q:What is the substance you use?

A1: Aluminum Housing physique ( For the RV series worm gearbox Dimension thirty~90)

A2: Forged iron(For the RV series worm gearbox, Measurement 110-one hundred fifty, For the NCJ & F/R/S/K sequence helical equipment reducer)

Any inquiry pls contact:
Nicola Huang (Export product sales)

Web site: gearbox1965

US $87.34-908.59
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery
Function:	Speed Reduction
Layout:	Corner
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Customization:	Available \| Customized Request

###

Housing material	Cast iron
Housing hardness	HBS90-240
Gear material:	20CrMnTi
Surface hardnesss of gear	HRC58°-62°
Gear core hardness	HRC33°-40°
Input/Output shaft material	40CrMnTi
Input/Output shaft hardness	HBS241°-286°
Shaft at oil seal postion hardness	HRC48 ° -55 °
Machining precision of gears material	Accurate grinding 6-5 grade
Heat treatment	tempering, cementing, quenching etc
Efficiency	up to 90%
Noise(Max)	60-68dB
Unit model	Foot mounted,flange mounted,hollow shaft mounted
Input method	flange input,inline input,shaft input
Vibration	≤ 20um
Backlash	≤ 20Arcmin
Bearing brands	NSK,C&U etc
Oil seal brands	NAK, etc
Lubricant	VG680
Motor	IP55, F class
Motor shaft	40Cr, Tempering, cementing,quenching etc.

US $87.34-908.59
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery
Function:	Speed Reduction
Layout:	Corner
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Customization:	Available \| Customized Request

###

Housing material	Cast iron
Housing hardness	HBS90-240
Gear material:	20CrMnTi
Surface hardnesss of gear	HRC58°-62°
Gear core hardness	HRC33°-40°
Input/Output shaft material	40CrMnTi
Input/Output shaft hardness	HBS241°-286°
Shaft at oil seal postion hardness	HRC48 ° -55 °
Machining precision of gears material	Accurate grinding 6-5 grade
Heat treatment	tempering, cementing, quenching etc
Efficiency	up to 90%
Noise(Max)	60-68dB
Unit model	Foot mounted,flange mounted,hollow shaft mounted
Input method	flange input,inline input,shaft input
Vibration	≤ 20um
Backlash	≤ 20Arcmin
Bearing brands	NSK,C&U etc
Oil seal brands	NAK, etc
Lubricant	VG680
Motor	IP55, F class
Motor shaft	40Cr, Tempering, cementing,quenching etc.

Worm gear reducer gearbox

Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm reducer

low clearance

A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm reducer

easy to replace

An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China S37-S97 Helical Worm Gearbox helical worm gearbox
editor by czh 2023-01-01

China Ss Shaft Input Helical Worm Gear Boxes Motor worm gearbox backlash

Product Description

> Item Introduction

Parallel Shaft Agricultural Gearbox Motor

GPHQ F helical parallel velocity reduction gear box are based on the constructing block style,so it’s convenient for them to in shape all sorts of motors or hook up with other electrical power enter.The same kind of blend can fit motors with various power,so that it truly is achievable for distinct types of machines to mix or link.

GPHQ F sequence velocity equipment reducer is 1 variety of parallel shaft helical gear reducer , which consist of 2 or 3 stages helical gears (relate to gear ratio) in the same case . The challenging tooth surface equipment use the higher quality alloy steel ,the process of carburizing and quenching, grinding 1,Output torque:two hundred-18000(N.m)
1,Rated energy:.twelve-200(kw)
2,Input velocity:≤3000 (rpm)
three,Output speed:≤393(rpm)
4,Transmission ratio:≥3.seventy seven
5,Series:2-three
6,Mounting way:M1-M6

> Motor Resources

housing material:	HT2OO higher-energy cast iron for F37,47,fifty seven,67,seventy seven,87 HT250 Substantial strength cast iron for F97,107,127,157
Equipment content:	20CrMnTi
Housing hardness	HBS90-240
Surface area hardnesss of gear	HRC58°-62°
Gear main hardness	HRC33°-40°
Input/Output shaft material	40Cr
Input/Output shaft hardness	HBS241°-286°
Shaft at oil seal postion hardness	HRC48 ° -55 °
Machining precision of gears substance	Precise grinding 6-5 grade
Efficiency	up to 98%
Noise(Max)	sixty-68dB
Tem.rise:	40°C
Vibration	≤20um
Motor	IP54, F class ,B5 FLANGE
shade :	blue (if you need to have big quantity ,we can done as your desired shade )

> Partial Solution Info

> Our Electric Motor Positive aspects

one. Affordable value with superb top quality
2.Every single 1 assessments carefully
three.Distinct nameplate
four.Trustworthy deal
five.Substantial efficiency, easy runingand reduced sounds
six.Greatest resources make best overall performance

> Creating Process

> About Us

HangZhou EXTENSION Speed Electricity CO.,LTD (HangZhou Very good COMMERCE & TRADE CO.LTD) specializes in the product sales of all sorts of gearbox , electric motors. On the revenue support and management has gathered abundant experience, has a number of very certified specialized personnel, management norms, good quality isstable. Products by the China nationwide necessary merchandise certification, high quality is trustworthy, affordable structure,and make “environmental defense” and “power saving” synchronization.

HangZhou Excellent COMMERCE & TRADE CO.,LTD(GPHQ ) has constantly been in line with: “dependent on sincerity, very good good quality for initial, the pursuit of excellence, pioneering and enterprising crew, efficient, innovation” . perfect aftersales support We will set up a company under the bridge of friendship, hand in hand Produce amazing!

FAQ
one, Q:what is actually your MOQ for ac gearbox motor ?
A: 1pc is ok for every single variety electrical gear box motor

two, Q: What about your guarantee for your induction speed reducer motor ?
A: 1 calendar year ,but apart from gentleman-manufactured destroyed

3, Q: which payment way you can accept ?
A: TT, western union .

4, Q: how about your payment way ?
A: a hundred%payment in innovative much less $5000 ,thirty% payment in sophisticated payment , 70% payment before sending over $5000.

five, Q: how about your packing of speed reduction motor ?
A: plywood circumstance ,if measurement is small ,we will pack with pallet for much less 1 container

6, Q: What data should be provided, if I purchase electric powered helical geared motor from you ?
A: rated power, ratio or output speed,variety ,voltage , mounting way , amount , if more is much better.

US $50-5,000
/ Piece
| 5 Pieces

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Bevel
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Customization:	Available \| Customized Request

###

housing material:	HT2OO high-strength cast iron for F37,47,57,67,77,87 HT250 High strength cast iron for F97,107,127,157
Gear material:	20CrMnTi
Housing hardness	HBS90-240
Surface hardnesss of gear	HRC58°-62°
Gear core hardness	HRC33°-40°
Input/Output shaft material	40Cr
Input/Output shaft hardness	HBS241°-286°
Shaft at oil seal postion hardness	HRC48 ° -55 °
Machining precision of gears material	Accurate grinding 6-5 grade
Efficiency	up to 98%
Noise(Max)	60-68dB
Tem.rise:	40°C
Vibration	≤20um
Motor	IP54, F class ,B5 FLANGE
color :	blue (if you need big quantity ,we can done as your wanted color )

US $50-5,000
/ Piece
| 5 Pieces

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Bevel
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Customization:	Available \| Customized Request

###

housing material:	HT2OO high-strength cast iron for F37,47,57,67,77,87 HT250 High strength cast iron for F97,107,127,157
Gear material:	20CrMnTi
Housing hardness	HBS90-240
Surface hardnesss of gear	HRC58°-62°
Gear core hardness	HRC33°-40°
Input/Output shaft material	40Cr
Input/Output shaft hardness	HBS241°-286°
Shaft at oil seal postion hardness	HRC48 ° -55 °
Machining precision of gears material	Accurate grinding 6-5 grade
Efficiency	up to 98%
Noise(Max)	60-68dB
Tem.rise:	40°C
Vibration	≤20um
Motor	IP54, F class ,B5 FLANGE
color :	blue (if you need big quantity ,we can done as your wanted color )

Advantages and disadvantages of worm gear reducer gearbox

Hollow shaft worm gear reducer gearbox

Multi-head worm gear reducer gearbox

Hypoid Gear Set

Hypoid gear motor

R series worm gear reducer gearbox

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Ss Shaft Input Helical Worm Gear Boxes Motor worm gearbox backlash
editor by czh 2022-12-30

China S Series Long Service Life Right Angle Helical Worm Gears Box with 22kw Three Phase Motor bevel vs worm gearbox

Merchandise Description

Product Description

Item Description

-S Sequence Helical gearbox

Product Attributes
1.Substantial modular layout.
2.Built-in casting housing,compact dimension,higher loading assistance, steady transmitting and minimal noise amount.
three.With the particular gear geometry, it will get higher torque, performance and extended lifestyle circle.
four.It can obtain the direct mix for 2 sets of gearbox.
five.High performance and preserve energy.

six.Help save price and minimal maintenance.

Solution Parameters

one. Technical data

Size	38	48	fifty eight	68	seventy eight	88	98
Construction	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	.eighteen~.seventy five	.eighteen~1.5	.eighteen~three	.25~5.five	.55~7.5	.75~15	1.5~22
Ratio	10.27~165.71	11.forty six~244.74	10.seventy eight~196.21	eleven.fifty five~227.twenty	9.ninety six~241.09	eleven.eighty three~223.26	12.seventy five~230.48
Permissible Torque(N.m)	90	a hundred and seventy	300	520	1270	2280	4000
Fat(kg)	seven	ten	14	26	50	one hundred	a hundred and seventy

two: Style option

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Brief-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

Resources Info Sheet

Housing material	Gray Solid iron
Housing hardness	HBS163~255
Equipment materials	20CrMnTi alloy metal
Surface area hardness of gears	HRC58°~sixty two °
Gear core hardness	HRC33~48
Enter / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	precise grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Warmth therapy	tempering, cementiting, quenching, normalizing, etc.
Effectiveness	ninety four%~ninety six% (depends on the transmission phase)
Noise (MAX)	sixty~68dB
Temp. increase (MAX)	40°C
Temp. increase (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China prime brand name bearing, HRB/LYC/ZWZ/C&U. Or other brand names requested, SKF, FAG, INA, NSK.
Model of oil seal	NAK — ZheJiang or other brands requested

Thorough Photos

Our method of production

Our solution line

Organization Profile

Organization Profile

Bode was founded in 2007, which is situated in HangZhou town, ZHangZhoug province. As 1 professional company and exporter, we have more than seventeen years’ knowledge in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare areas. We have manufacturing unit with superior creation and test tools, the powerful advancement of group and making capability offer our customers with large high quality goods. Our items widely served to numerous industries of Metallurgy, Substances, lifting, mining, Petroleum, textile, drugs, picket and so on. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to request us any queries, great supply always for you for long expression business.

FAQ

Q1: Are you trading organization or producer?
A: We are manufacturing unit.

Q2: What varieties of gearbox can you generate for us?
A: Main products of our business: R, S, K, F series helical-tooth reducer, RV sequence worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for every custom drawing?
A: Of course, we supply personalized services for clients.

Q4: Can we buy 1 personal computer of every product for good quality tests?
A: Sure, we are glad to settle for demo get for good quality tests.

Q5: What data shall we give ahead of positioning a acquire purchase?
A: a) Variety of the gearbox, ratio, input and output kind, enter flange, mounting position, and motor informationetc.
b) Housing colour.
c) Acquire quantity.
d) Other particular requirements.

Q6: How prolonged is your supply time?
A: Typically it is 5-ten days if the products are in inventory. or it is fifteen-20 times if the items are not in inventory.

Q7: What is your phrases of payment ?
A: thirty% Progress payment by T/T right after signing the contract.70% just before supply

If you are interested in our item, welcome to speak to with us.
Our staff will do our best to meet up with your require 🙂

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

US $90-5,500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

###

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

###

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — Taiwan or other brands requested

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<br

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China S Series Long Service Life Right Angle Helical Worm Gears Box with 22kw Three Phase Motor bevel vs worm gearbox
editor by czh 2022-12-19

China Factory Price Europe Quality Standard Industrial Helical Gearbox helical worm gearbox

Solution Description

Item Description

KPC Sequence helical gearbox is a new generation item which created basing on the modular program, It can be related respectively with motors this kind of as IEC standard motor, brake motor, explosion-evidence motor, frequency motor, servo motor and so on. it has 4 types(),energy from .12kw to 4.0kw, ratio from 3.66 to fifty eight.09, Max torque from 120Nm to 500Nm.It can be connect discretionary(foot or flange) and use multi-mounting positions accordingly. This merchandise is broadly used in textile, foodstuff, beverage,tobacco, logistics industrial fields,and so forth.

Merchandise Characteristics

Modular construction
Higher effectiveness
Precise grinding, reduced sound
Compact structural design and style
Univeral mounting
Aluminium housing, light-weight in weight
Carbonize and grinding hardened gears, durable
Multi-composition, can be combined in different varieties to meet up with various transmission problem

Installation:
1.Foot mounted
2.Output Flange mounted
3.B14 Flange mounted

Designs:
1.KPC..P(Foot-mounted): KPC01P,KPC02P,KPC03P,KPC04P
2.KPCF..P(Output Flange-mounted): KPCF01P,KPCF02P,KPCF03P,KPCF04P
3.KPCZ..P(B14 Flange-mounted): KPCZ01P,KPCZ02P,KPCZ03P,KPCZ04P

In depth Photographs

Item Parameters

GEARBOX Choosing TABLES
KPC01..				n1=1400r/min				120Nm
n2	M2max	Fr2	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
[r/min]	[Nm]	[N]	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
26	one hundred twenty	2600	fifty three.33	160/3
31	120	2600	45.89	413/nine
35	a hundred and twenty	2600	forty.10	3248/81
39	one hundred twenty	2560	35.47	532/15
forty nine	a hundred and twenty	2380	28.50	770/27
fifty nine	one hundred twenty	2230	23.56	212/9
71	a hundred and twenty	2100	19.83	119/six
seventy eight	ninety	2030	17.86	1357/76
ninety six	one hundred twenty	1900	fourteen.62	658/forty five
101	ninety	1860	thirteen.eighty*	69/five
118	a hundred and twenty	1770	11.90	2464/207
143	120	1660	nine.81	1148/117
153	eighty	1630	9.17	1219/133
181	eighty	1540	seven.72	1173/152
246	70	1390	five.69	1081/a hundred ninety
302	70	1290	four.63	88/19
366	70	1210	3.82	943/247
KPC02..				n1=1400r/min				200Nm
n2	M2max	Fr2	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
[r/min]	[Nm]	[N]	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
26	two hundred	4500	fifty four.00*	fifty four/1
30	two hundred	4500	46.46*	3717/eighty
34	two hundred	4500	forty.60*	203/5
39	two hundred	4270	35.ninety one*	3591/100
forty eight	200	3970	28.88*	231/eight
fifty nine	two hundred	3730	23.eighty five*	477/twenty
70	200	3520	twenty.08*	3213/one hundred sixty
eighty two	140	3330	seventeen.10	3009/176
95	two hundred	3180	fourteen.eighty one*	2961/200
106	140	3060	thirteen.21	2907/220
116	two hundred	2970	12.05	1386/a hundred and fifteen
141	200	2780	9.93	2583/260
159	one hundred twenty	2670	8.78	2703/308
189	120	2520	seven.39	2601/352
257	100	2280	five.45	2397/440
316	100	2120	4.43	102/23
383	eighty	1990	3.66	2091/572
KPC03..				n1=1400r/min					300Nm
n2	M2max	Fr2	i	Proportion	71B5/B14	80B5/B14	90B5/B14	100B5/B14	112B5/B14
[r/min]	[Nm]	[N]	i	Proportion	71B5/B14	80B5/B14	90B5/B14	100B5/B14	112B5/B14
24	300	6000	fifty eight.09	639/11
28	300	6000	fifty.02	2201/forty four
32	three hundred	6000	43.75	4331/ninety nine
36	300	6000	38.73	426/eleven
forty	three hundred	5860	34.62	4189/121
forty nine	three hundred	5480	28.30	4047/143
sixty four	280	5571	21.78	1917/88
81	280	4660	seventeen.33	3621/209
ninety three	260	4440	fifteen.06	497/33
113	260	4160	12.37	1633/132
136	240	3910	10.28	3053/297
177	180	3590	seven.93	1269/160
222	a hundred and eighty	3320	six.31	2397/380
255	a hundred and fifty	3170	5.48	329/sixty
311	a hundred and fifty	2970	four.50	1081/240
374	a hundred and fifty	2790	3.74	2571/540
KPC04..				n1=1400r/min				500Nm
n2	M2max	Fr2	i	Proportion	80B5/B14	90B5/B14	100B5/B14	112B5/B14
[r/min]	[Nm]	[N]	i	Proportion	80B5/B14	90B5/B14	100B5/B14	112B5/B14
24	500	8000	58.09	639/11
28	500	8000	fifty.02	2201/44
32	five hundred	8000	43.75	4331/ninety nine
36	five hundred	8000	38.73	426/11
40	500	7950	34.62	4189/121
forty nine	five hundred	7430	28.30	4047/143
64	480	6810	21.78	1917/88
eighty one	480	6310	17.33	3621/209
93	460	6571	fifteen.06	497/33
113	460	5640	12.37	1633/132
136	440	5300	10.28	3053/297
177	260	4860	seven.93	1269/one hundred sixty
222	260	4510	six.31	2397/380
255	230	4300	5.48	329/sixty
311	230	4030	4.50	1081/240
374	two hundred	3780	three.74	2571/540

Define Dimension:

Firm Profile

About our company:
We are a professional reducer manufacturer positioned in HangZhou, ZHangZhoug province.Our foremost items is full variety of RV571-150 worm reducers , also provided hypoid helical gearbox, Personal computer models, UDL Variators and AC Motors.Items are extensively employed for programs this kind of as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-making, building machinery, metallurgic mine, environmental protection engineering, and all sorts of automated strains, and assembly lines.With fast shipping, superior following-revenue support, innovative producing facility, our items sell well both at house and abroad. We have exported our reducers to Southeast Asia, Japanese Europe and Center East and so on.Our intention is to create and innovate on basis of substantial quality, and produce a good popularity for reducers.

Packing info:Plastic Bags+Cartons+Wood Situations , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Get Eurasia

Logistics

We can dispatch products by sea, by practice, by air according to buyer instruction

Following Product sales Provider

one.Maintenance Time and Guarantee:Inside of 1 yr soon after acquiring goods.
2.Other Provider: Which includes modeling variety manual, installation information, and dilemma resolution information, etc.

FAQ

1.Q:Can you make as for each consumer drawing?
A: Sure, we offer tailored services for customers appropriately. We can use customer’s nameplate for gearboxes.

two.Q:What is your conditions of payment ?
A: 30% deposit ahead of production,stability T/T just before shipping and delivery.

3.Q:Are you a trading firm or manufacturer?
A:We are a manufacurer with sophisticated tools and skilled personnel.

four.Q:What is your manufacturing capability?
A:8000-9000 PCS/Thirty day period

five.Q:Free of charge sample is available or not?
A:Yes, we can provide free of charge sample if customer concur to spend for the courier value

6.Q:Do you have any certification?
A:Yes, we have CE certificate and SGS certificate report.

Contact data:
Ms Lingel Pan
For any inquiries just feel free ton contact me. Several many thanks for your sort interest to our company!

US $45-80
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 45/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

GEARBOX SELECTING TABLES
KPC01..				n1=1400r/min				120Nm
n2	M2max	Fr2	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
[r/min]	[Nm]	[N]	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
26	120	2600	53.33	160/3
31	120	2600	45.89	413/9
35	120	2600	40.10	3248/81
39	120	2560	35.47	532/15
49	120	2380	28.50	770/27
59	120	2230	23.56	212/9
71	120	2100	19.83	119/6
78	90	2030	17.86	1357/76
96	120	1900	14.62	658/45
101	90	1860	13.80*	69/5
118	120	1770	11.90	2464/207
143	120	1660	9.81	1148/117
153	80	1630	9.17	1219/133
181	80	1540	7.72	1173/152
246	70	1390	5.69	1081/190
302	70	1290	4.63	88/19
366	70	1210	3.82	943/247
KPC02..				n1=1400r/min				200Nm
n2	M2max	Fr2	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
[r/min]	[Nm]	[N]	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
26	200	4500	54.00*	54/1
30	200	4500	46.46*	3717/80
34	200	4500	40.60*	203/5
39	200	4270	35.91*	3591/100
48	200	3970	28.88*	231/8
59	200	3730	23.85*	477/20
70	200	3520	20.08*	3213/160
82	140	3330	17.10	3009/176
95	200	3180	14.81*	2961/200
106	140	3060	13.21	2907/220
116	200	2970	12.05	1386/115
141	200	2780	9.93	2583/260
159	120	2670	8.78	2703/308
189	120	2520	7.39	2601/352
257	100	2280	5.45	2397/440
316	100	2120	4.43	102/23
383	80	1990	3.66	2091/572
KPC03..				n1=1400r/min					300Nm
n2	M2max	Fr2	i	Proportion	71B5/B14	80B5/B14	90B5/B14	100B5/B14	112B5/B14
[r/min]	[Nm]	[N]	i	Proportion	71B5/B14	80B5/B14	90B5/B14	100B5/B14	112B5/B14
24	300	6000	58.09	639/11
28	300	6000	50.02	2201/44
32	300	6000	43.75	4331/99
36	300	6000	38.73	426/11
40	300	5860	34.62	4189/121
49	300	5480	28.30	4047/143
64	280	5020	21.78	1917/88
81	280	4660	17.33	3621/209
93	260	4440	15.06	497/33
113	260	4160	12.37	1633/132
136	240	3910	10.28	3053/297
177	180	3590	7.93	1269/160
222	180	3320	6.31	2397/380
255	150	3170	5.48	329/60
311	150	2970	4.50	1081/240
374	150	2790	3.74	2021/540
KPC04..				n1=1400r/min				500Nm
n2	M2max	Fr2	i	Proportion	80B5/B14	90B5/B14	100B5/B14	112B5/B14
[r/min]	[Nm]	[N]	i	Proportion	80B5/B14	90B5/B14	100B5/B14	112B5/B14
24	500	8000	58.09	639/11
28	500	8000	50.02	2201/44
32	500	8000	43.75	4331/99
36	500	8000	38.73	426/11
40	500	7950	34.62	4189/121
49	500	7430	28.30	4047/143
64	480	6810	21.78	1917/88
81	480	6310	17.33	3621/209
93	460	6020	15.06	497/33
113	460	5640	12.37	1633/132
136	440	5300	10.28	3053/297
177	260	4860	7.93	1269/160
222	260	4510	6.31	2397/380
255	230	4300	5.48	329/60
311	230	4030	4.50	1081/240
374	200	3780	3.74	2021/540

US $45-80
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 45/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

GEARBOX SELECTING TABLES
KPC01..				n1=1400r/min				120Nm
n2	M2max	Fr2	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
[r/min]	[Nm]	[N]	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
26	120	2600	53.33	160/3
31	120	2600	45.89	413/9
35	120	2600	40.10	3248/81
39	120	2560	35.47	532/15
49	120	2380	28.50	770/27
59	120	2230	23.56	212/9
71	120	2100	19.83	119/6
78	90	2030	17.86	1357/76
96	120	1900	14.62	658/45
101	90	1860	13.80*	69/5
118	120	1770	11.90	2464/207
143	120	1660	9.81	1148/117
153	80	1630	9.17	1219/133
181	80	1540	7.72	1173/152
246	70	1390	5.69	1081/190
302	70	1290	4.63	88/19
366	70	1210	3.82	943/247
KPC02..				n1=1400r/min				200Nm
n2	M2max	Fr2	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
[r/min]	[Nm]	[N]	i	Proportion	63B5	71B5/B14	80B5/B14	90B5/B14
26	200	4500	54.00*	54/1
30	200	4500	46.46*	3717/80
34	200	4500	40.60*	203/5
39	200	4270	35.91*	3591/100
48	200	3970	28.88*	231/8
59	200	3730	23.85*	477/20
70	200	3520	20.08*	3213/160
82	140	3330	17.10	3009/176
95	200	3180	14.81*	2961/200
106	140	3060	13.21	2907/220
116	200	2970	12.05	1386/115
141	200	2780	9.93	2583/260
159	120	2670	8.78	2703/308
189	120	2520	7.39	2601/352
257	100	2280	5.45	2397/440
316	100	2120	4.43	102/23
383	80	1990	3.66	2091/572
KPC03..				n1=1400r/min					300Nm
n2	M2max	Fr2	i	Proportion	71B5/B14	80B5/B14	90B5/B14	100B5/B14	112B5/B14
[r/min]	[Nm]	[N]	i	Proportion	71B5/B14	80B5/B14	90B5/B14	100B5/B14	112B5/B14
24	300	6000	58.09	639/11
28	300	6000	50.02	2201/44
32	300	6000	43.75	4331/99
36	300	6000	38.73	426/11
40	300	5860	34.62	4189/121
49	300	5480	28.30	4047/143
64	280	5020	21.78	1917/88
81	280	4660	17.33	3621/209
93	260	4440	15.06	497/33
113	260	4160	12.37	1633/132
136	240	3910	10.28	3053/297
177	180	3590	7.93	1269/160
222	180	3320	6.31	2397/380
255	150	3170	5.48	329/60
311	150	2970	4.50	1081/240
374	150	2790	3.74	2021/540
KPC04..				n1=1400r/min				500Nm
n2	M2max	Fr2	i	Proportion	80B5/B14	90B5/B14	100B5/B14	112B5/B14
[r/min]	[Nm]	[N]	i	Proportion	80B5/B14	90B5/B14	100B5/B14	112B5/B14
24	500	8000	58.09	639/11
28	500	8000	50.02	2201/44
32	500	8000	43.75	4331/99
36	500	8000	38.73	426/11
40	500	7950	34.62	4189/121
49	500	7430	28.30	4047/143
64	480	6810	21.78	1917/88
81	480	6310	17.33	3621/209
93	460	6020	15.06	497/33
113	460	5640	12.37	1633/132
136	440	5300	10.28	3053/297
177	260	4860	7.93	1269/160
222	260	4510	6.31	2397/380
255	230	4300	5.48	329/60
311	230	4030	4.50	1081/240
374	200	3780	3.74	2021/540

Worm Reducer – What You Need to Know

When shopping for a Worm Reducer, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducers and the applications that they can be used for. This will help you choose the right unit for your application.
worm_reducer

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducers also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer to function properly.Another important feature of a worm reducer is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm Reducer market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm Reducer market.
The major regional markets for the Worm Reducer include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm_reducer

Cost

Cost is an important consideration when selecting a worm reducer. The initial cost of a worm gear reducer is considerably lower than other types of gear reducers. Worm gear reducers are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer.Stainless steel worm gear reducers from WorldWide Electric offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducers are available in stock from all six of WorldWide Electric’s regional warehouses. They also come with free prepaid freight.Worm gear reducers are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducers are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducers vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer should be selected according to the specific application.The worm gear reducer saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducers are common. Many gear manufacturers have large stocks of these gear reducers. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer for your application. In addition, the worm gear reducer is easy to install and maintain.
worm_reducer

Worm gear reducer oil

Worm gear reducers usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducers are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducers require less frequent oil changes than other types of gear reducers. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China Factory Price Europe Quality Standard Industrial Helical Gearbox helical worm gearbox
editor by czh 2022-11-25

China Best Sales NMRV090 Series wpa worm gear reducer electronic variator hollow shaft motor speed variator bevel helical gearbox worm gearbox back drive

Gearing Arrangement: Worm
Output Torque: 4~2320Nm
Enter Speed: .28~4.7rpm
Output Pace: 1400rpm(4pole)
Shade: RAL9006(gray) OR RAL5571(blue)
Label: Buyer prerequisite
Material of housing: Aluminum&Solid Iron
Enter Flange: IEC flange for mounting motor
Customization: Acceptable
Good quality Control System: ISO9001:2008
Packaging Particulars: Carton + Wood Scenario
Port: ZheJiang /HangZhou port

Items CHARACTERISTICS1. Mad of higher-high quality aluminum alloy,light excess weight and non-rusting
two. Massive output torque
three. Smooth in managing and lower in sound,can function prolonged time in dreadful situations.
4. Substantial in radiating effectiveness.
5. Excellent-looking in appearance,tough in support daily life and little in quantity.
6. Suitable for omnibearing installation.

Type:	Worm Equipment Velocity Reducer/ Gearbox
Model No.:	NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
Ratio:	five,7.5,ten,fifteen,twenty,25,thirty,forty,50,sixty,eighty,a hundred
Colour:	Blue(Ral5571)/Silver Grey (RAL9006) Or On Client Request
Material:	Housing: Measurement twenty five-a hundred and ten Is Aluminum Alloy, Size 110-a hundred and fifty Is Forged-Iron
	Worm Wheel: ZCuSn10Pb1
	Worm:20Cr
	Pinion:Tin Bronze
	Output Shaft: Metal-forty five#
Usages:	Industrial Device: Foods Things, Ceramics, Chemical, Packing, Dyeing,Wood functioning, Glass.
IEC Flange:	IEC Normal Flange Or On Customer Ask for

Certifications

Trade Demonstrates

Packaging & ShippingPacking Information : Regular carton/Pallet/Regular picket case
Shipping and delivery Specifics : 15-thirty working days on payment

Business Information
other series solution

Precision Planetary gearbox	Robotic RV gearbox velocity reducer
Personalized manufactured Non-regular Gearbox	UDL Series Variator
PYZ Series Helical Tooth Shaft Mounted Reducer	8000 Collection Cycloidal Reducer
SLT Series Spiral Bevel Gearbox	SLSWL Collection Worm Screw Jack
SLP Sequence Planetary Reducer	SLH/SLB Sequence High Electricity Reducer
NMRV Series Worm Reducer	BKM Sequence Helical-hypoid Reducer
SLRC Series Helical Reducer	SLSMR Sequence Shaft Mounted Reducer
SLXG Collection Shaft Mounted Reducer	X/B Series Cycloidal Reducer
SLR/SLF/SLK/SLS Collection Helical Reducer

Connected Products

Contact

Worm gear reducer

A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
worm_reducer

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm_reducer

application

The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm_reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China Best Sales NMRV090 Series wpa worm gear reducer electronic variator hollow shaft motor speed variator bevel helical gearbox worm gearbox back drive