|Name||special speed reducer|
|Specification||Depends on customer’s requirements|
DETAILS ABOUT Xihu (West Lake) Dis.ang Transmission Equipment Co.,Ltd.
Founded in 1969, ZheJiang Xihu (West Lake) Dis.ang Transmission Equipment Co., Ltd. Is the professional manufacturer of R&D and production reduction gears, with a staff of 510. Company has set up ZheJiang Provincial enterprise technology center and Provincial worm drive engineering technology research center, which has 73 research personnel, including 20 advanced titles, and possesses 48 patents, including 4 invention patents, 2 software copyright.
“JinXiang” brand is honored with ZheJiang famous trademark, ZheJiang famous brand products. The company ranks the top 10 in the same industry and top 5 in the high-end transmission equipment. Including the R & D and market share of Niemann worm reducer rank first, the market share of 48 patents products such as edge transmission mill reducer and crystallizer professional reducer all exceed 60%. The obtainment of technology mainly is independent development and industry-university-research cooperation joint development. The Company is awarded with ZheJiang AAA grade credit enterprise, re-contract and trustworthy enterprise, ZheJiang measurement guarantee confirmation enterprise. We have passed ISO9001 QMSC in 1998.
The company is the professional manufacturer of R&D and production reduction gears; The sales income of high technology products has surpassed the 60%. Production technological contents take the leading position in the same industry.
In recent years, the company has undertaken more than 20 provincial and municipal science and technology or technical transformation projects, including 5 kinds of products such as two-stage worm gear reducer, vertical mill reducer, were identified as “hightech products [by provincial science bureau, a new type of vertical mill reducer is awarded [Jiiangsu Excellent new products” by ZheJiang Economic And Information Technology Commission, industrialization of high performance composites worm gear reducer was awarded national CHINAMFG plan (2008 gh5711), R&D of extra-large diversion vertical mill drive was awarded the provincial science and technology support plan (8 e2571131), The company has been awarded national CHINAMFG plan high-tech enterprise, the provincial high-tech enterprise, provincial innovative company, Provincial innovation ability construction demonstration enterprise, the provincial science and technology SME, the most innovative enterprise in Chinese machinery industry etc., which belongs to the leader in the industry field.
PACKING AND SHIPPING DETAILS
1. Are you manufacturer or trade Company?
We are a factory founded in 1969 with trade team for international service.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight
3. What is your lead time for your goods?
For customers who need sample confirmation before ordering, please bear in mind that the following policy will be adopted:
1) All samples are free of charge with the maximum value not exceeding USD 100.
2) The courier cost for the first-time sample sending will be charged for by the consignee. We will send the samples with freight to be collected. So please inform your account with FedEx, UPS, DHL or TNT so that we can proceed promptly.
3) The first-time courier cost will be totally deducted from the contract value of the trial cooperation.
5. Order Process
|1.Sample/Drawing||We need your detail require clearly.|
|2.Negotiation||Material,cavity,price,delivery time,payment term ,etc.|
|3.Place order||According your own design or choice our design.|
||We will communicate&Exchange the opinion with you during making drawing|
|5.Tooling mould||After custome approve the mould design will start making mould.|
|6.Mould process||Provide photos for customer show them tooling process|
|7.Sample confirm||Send you sample for confoirm it ,if not satisfied by customer.we modify mould .|
|8.Delivery||Delivery mould after customer approve sample and arrange shipment.|
|Application:||Electric Cars, Motorcycle, Agricultural Machinery|
|Hardness:||Hardened Tooth Surface|
|Gear Shape:||Bevel Gear|
Common Problems and Troubleshooting for Worm Gearboxes
Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:
- Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
- Noise and Vibration: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
- Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
- Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
- Backlash: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
- Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
- Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
- Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.
If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.
Worm Gearbox vs. Helical Gearbox: A Comparison
Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let’s compare them:
|Aspect||Worm Gearbox||Helical Gearbox|
|Efficiency||Lower efficiency due to sliding friction between the worm and worm wheel.||Higher efficiency due to rolling contact between helical gear teeth.|
|Torque Transmission||Excellent torque transmission and high reduction ratios achievable in a single stage.||Good torque transmission, but may require multiple stages for high reduction ratios.|
|Noise and Vibration||Generally higher noise and vibration levels due to sliding action.||Lower noise and vibration levels due to smoother rolling contact.|
|Backlash||Higher inherent backlash due to the design.||Lower backlash due to meshing of helical teeth.|
|Efficiency at Higher Speeds||Less suitable for high-speed applications due to efficiency loss.||More suitable for high-speed applications due to higher efficiency.|
|Overload Protection||Natural self-locking feature provides some overload protection.||May not have the same level of inherent overload protection.|
|Applications||Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery.||Widely used in various applications including automotive transmissions, industrial machinery, and more.|
Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.
Types of Worm Gear Configurations and Their Uses
Worm gear configurations vary based on the arrangement of the worm and the gear it engages with. Here are common types and their applications:
- Single Enveloping Worm Gear: This configuration offers high torque transmission and efficiency. It’s used in heavy-duty applications like mining equipment and industrial machinery.
- Double Enveloping Worm Gear: With increased contact area, this type provides higher load capacity and improved efficiency. It’s used in aerospace applications, robotics, and precision machinery.
- Non-Throated Worm Gear: This type has a cylindrical worm without a throat. It’s suitable for applications requiring precise motion control, such as CNC machines and robotics.
- Throated Worm Gear: Featuring a throat in the worm, this configuration offers smooth engagement and higher load capacity. It’s used in conveyors, elevators, and automotive applications.
- Non-Modular Worm Gear: In this design, the worm and gear are a matched set, resulting in better meshing and efficiency. It’s utilized in various industries where customization is essential.
- Modular Worm Gear: This type allows interchangeability of worm and gear components, providing flexibility in design and maintenance. It’s commonly used in conveyors, mixers, and material handling systems.
Selecting the appropriate worm gear configuration depends on factors such as load capacity, efficiency, precision, and application requirements. Consulting gearbox experts can help determine the best configuration for your specific needs.
editor by CX 2023-09-26