3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal velocity reducer. It utilizes 52100 grade bearing metal on most of its speed reduction components. It really is offered with a complete two year warranty, not tied to hours of operation, and is able to endure abuse that would break the teeth of ordinary rate reducers.
The EP 3000, readily available with inputs for both servo and induction motors, features a compact design with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Provided in two backlash ratings and multiple mounting options, the EP 3000 includes a design difficult enough for both servo and standard induction motor applications. The initial two piece pin housing design guarantees result shaft backlash rankings of significantly less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows a credit card applicatoin to attain negligible backlash, maintain outstanding rigidity, and increase control stability to ensure that the desired output motion can be easily achieved. The design is truly a unique concept, employing a full get in touch with screw-like transmission for high performance and elimination of wear. The unit provides optimum compactness using orthogonal axes and includes a big hollow shaft for versatility.
WORM SERVO GEAR REDUCER
Wide range of servo gearboxes, made to fit almost all servo motors found on the market
Designed for the highest torsional stiffness and the lowest angular backlash, to get the utmost torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The correct technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical devices) Catalog SR
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the growth of our selection of Servo Reducers, today offering five levels of precision to meet any application requirements. The five levels of precision available allows a machine developer to select the mandatory reducer precision to meet up their needs and their spending budget. They can be purchased in both in-line and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, E and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and mounting flanges are available for the complete reducer range to attach virtually any servo motor and the hollow bore output can be used to install output shafts, pinion shafts, or other drive components.
These reducers are typically selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces rely on the driven load, the swiftness vs. period profile for the cycle, and any other external forces acting on the axis. For more selection information, please follow this PDF link.
For application & selection assistance, please call, fax or email us. Your application details will be reviewed by our engineers, who’ll recommend the very best solution for the application.
EP Inc. provides a full selection of modular servo gearboxes /worm reducers. The modular design permits configurations with motor insight flange and result pinion for rack and pinion drives, as well as solid result shafts, Hollow bore result, and insight shafts for all other positioning applications. The modular style allows for universal installation of the gearbox in virtually any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they result in a short total length of the motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be constructed on the gear’s output side.
Built with a simple and robust design, the series has gearing ratios that range from 6:1 to 75:1. The user can also customize the components through the order, so as to match the apparatus to its intended program.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with dual shaft, right position shaft and right angle output, as well as a full range of adapters for electric motor mounting, making them capable of meeting certain requirements of also the most varied applications. They are designed for use with integrated servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used with other EP engine types. This range of products is founded on years of encounter and represents the end result of a decade-long study targeted at improving performance.
Optimum precision and dynamics, coupled with remarkable torque density, are the key requirements specific for reliable servo gearboxes used. EP provides servo gearboxes for just about any software and any overall performance range. Our low-backlash planetary and right-position gearboxes reflect our interest for development and the best levels of precision.
Worm equipment reducers provide market advance solution with performance and flexibility. Low quantity of basic models could be applied to a wide selection of power ratings guaranteeing best performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical products. When the motor acceleration needs to be reduced, the output torque raises and send torque totally to the application form. We believe that clients will appreciate our equipment reducer to achieve their demand. Just check out EP, you may get more information regarding servo gearheads, servo gearboxes, and equipment reducers. We continue to keep going forward for your support.
Plug the Acceleration Reducer in to the desired channel of your receiver, and connect the business lead from your own servo (or servo wye) in to the male servo lead coming from the circuit plank. The established screw on the blue trim pot, located near the top of the primary circuit board, is used to control the swiftness of the servo. Turn the set screw completely clockwise (CW) for normal servo speed without speed reduction, completely counter-clockwise (CCW) for optimum speed reduction, or any place in between for partial swiftness reduction. The red LED indicates three feasible conditions: Gradual Blinking = No Signal; Solid On = No Speed Reduction; Fast Blinking = Reduced Acceleration Setting
Please note that if you make any change to the speed setting while the receiver is on, you need to cycle capacity to the receiver (turn if off and back on) for the brand new speed establishing to take effect. This circuit can also be used in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposing directions for appropriate function. Guidelines are included for easy set up and use.
IMPORTANT NOTE: This product will only work on a normal, proportional servo. You won’t focus on a retract-type servo, because they do not acknowledge any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, also by a transmitter that includes this function, as their design and electronics don’t allow it. Verify the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a more scale-like motion of flaps or retracts. Adjustable, it could be set to lessen the acceleration of your servo from super-slow motion to no speed reduction at all, with an nearly infinite number of positions in between. Maximum reduction time for a servo to visit 90 degrees is approximately 14 seconds, minimum time (no reduction) is merely the normal swiftness of the servo. Ideal for reducing or eliminating the inclination of a plane to “balloon up” when flaps are deployed. It can be used to control more than one servo by use of a regular servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as packaging devices, gantries, injection molding machines, pick and place, and linear slides.Offered in concentric shaft, correct position solid shaft, and correct angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to easily mount to any manufacturer’s servo motor. The EP Series helical gears have slanted teeth in comparison to spur gears with directly cut teeth, making a smoother gear mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance components.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units are available in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 output, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 output, with keyway
Learn more about servo gear reducer right here.