Where the EPNMRV 110 Is Used
Deployed on mining belt conveyor head drives, large penstock and sluice gate actuators in dam infrastructure, heavy-duty sludge scraper drives in water treatment, industrial kiln rotation drives, and large-format woodworking machinery feed systems. In Australia, the EPNMRV 110 is specified for mining conveyor retrofit projects in the Bowen Basin and water treatment infrastructure across metropolitan Sydney.
When to Choose This Model
Select the EPNMRV 110 for sustained input powers between 2.2 kW and 4.0 kW. For applications demanding 5.5 kW+ or output torques above 1,200 Nm, the EPNMRV 130 provides additional capacity with 132-frame motor flange compatibility.
For detailed information on housing materials, worm gear efficiency characteristics, and installation orientation guidelines, refer to the EPNMRV Series overview.
EPNMRV 110 Specifications
All data for the EPNMRV 110 standalone gearbox. Input speed: 1,400 RPM.
Selection Table (Input: 1,400 RPM)
| Input Power (kW) | Ratio | Output Speed (RPM) | Torque (Nm) | Radial Load (N) | Service Factor fs |
|---|---|---|---|---|---|
| 0.55 | 30 | 47 | 82 | 4440 | 1.6 |
| 40 | 35 | 105 | 4865 | 1.4 | |
| 0.75 | 20 | 70 | 82 | 3272 | 1.6 |
| 25 | 56 | 95 | 3509 | 2.1 | |
| 30 | 47 | 122 | 4160 | 1.6 | |
| 40 | 35 | 148 | 4865 | 1.3 | |
| 1.1 | 15 | 93 | 129 | 3509 | 1.6 |
| 20 | 70 | 174 | 5241 | 1.2 | |
| 25 | 56 | 216 | 4865 | 1.6 | |
| 1.5 | 15 | 93 | 196 | 5569 | 1.0 |
| 20 | 70 | 258 | 6783 | 1.1 | |
| 2.2 | 10 | 140 | 302 | 7306 | 0.9 |
| 15 | 93 | 274 | 8571 | 1.4 | |
| 20 | 70 | 322 | 9232 | 1.5 | |
| 3.0 | 10 | 140 | 379 | 7328 | 1.7 |
| 15 | 93 | 379 | 7328 | 1.2 | |
| 20 | 70 | 462 | 6803 | 1.5 | |
| 4.0 | 7.5 | 187 | 341 | 3893 | 1.6 |
| 10 | 140 | 450 | 4285 | 1.3 | |
| 15 | 93 | 660 | 4905 | 1.0 |
fs = Service Factor. Required minimums: A (uniform) fs >= 1.0 | B (moderate shock) fs >= 1.25 | C (heavy shock) fs >= 1.75. Contact our engineers for application-specific verification.
Gear Engagement Parameters
| Ratio (i) | Worm Starts (Z1) | Lead Angle | Module (m) | Dynamic Eff. | Static Eff. | Self-Locking |
|---|---|---|---|---|---|---|
| 5 | 4 | 28 deg 46 min | 5 | 0.90 | 0.89 | No |
| 7.5 | 4 | 22 deg 22 min | 5 | 0.89 | 0.87 | No |
| 10 | 4 | 15 deg 21 min | 3.75 | 0.86 | 0.85 | No |
| 15 | 2 | 14 deg 20 min | 2 | 0.84 | 0.82 | No |
| 20 | 2 | 14 deg 02 min | 2 | 0.85 | 0.84 | No |
| 25 | 1 | 11 deg 19 min | 2 | 0.79 | 0.78 | No |
| 30 | 1 | 7 deg 17 min | 2 | 0.75 | 0.72 | No |
| 40 | 1 | 5 deg 48 min | 2 | 0.67 | 0.63 | No |
| 50 | 1 | 4 deg 54 min | 2 | 0.63 | 0.59 | Marginal |
| 60 | 1 | 3 deg 37 min | 1.25 | 0.55 | 0.51 | Marginal |
| 80 | 1 | 3 deg 41 min | 1 | — | — | Yes |
| 100 | 1 | — | — | — | — | Yes |
Self-locking should not be relied upon as the sole backstop — external brakes recommended for safety-critical loads.
Overall Dimensions (mm)
| Model | A | B | C | D(H8) | F | G | H | H1 | I | M |
|---|---|---|---|---|---|---|---|---|---|---|
| EPNMRV 110 | 255 | 295 | 60 | 170 | 42 | 130 | 155 | 135 | 165 | 74 |
All dimensions in mm. Default mounting: B3 (horizontal). Specify orientation at time of order.
Output Shaft Dimensions (mm)
| Model | G1 | K1 | L | L1 | b2 | t2 | d(h6) | m | V1 | V2 |
|---|---|---|---|---|---|---|---|---|---|---|
| EPNMRV 110 | 155 | 162 | 249 | 324 | 12 | 45 | 42 | M16 | 80 | 84.5 |
d(h6) = output shaft diameter with h6 tolerance. Contact us for double-side output (SZ) or hollow shaft configurations.
Other Models in This Series
The EPNMRV range covers centre distances from 25 mm to 150 mm.