worm reduction
\nOur regular 700 Series – the heart of EP swiftness reducer products – has been serving industry reliably for over 10 years. Its proven modular style has set the sector standard for efficiency and is the most imitated merchandise in today’s worm gear acceleration reducer marketplace. But why settle for a knock-off when you’re able to have the initial – from EP.
\nSpecifications
\n11 basic solitary reduction sizes
\n8 basic double reduction sizes
\n1\/6 – 25 HP
\n5:1 – 100:1 ratios single reduction
\n100:1 – 3600:1 ratios double reduction
\nNon-flanged, NEMA C-face quill, and coupled input styles
\nProjecting and hollow result shafts
\nProjecting diameters from 1\/2″ to 2-1\/4″
\nHollow result bore diameters from 5\/8″ to 3-7\/16″ (with over 20 bore sizes in share)
\nProduct Features
\nThe 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
\nIts multi-position mounting flexibility permits installation in virtually any position.
\nHousings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
\nInternal baffles assure great, leak-free venting.
\nThe 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
\nEP 700 Series high-strength bronze worm equipment is straddle mounted around heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
\nOur 700 Series’ high-strength steel output shaft assures capacity for large torque and overhung loads.
\nPipe plugs allow easy fill up, level, and drain in almost any mounting position.
\nThe 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
\nBoth 2D and 3D CAD drawings can be found in our eCatalog.
\nEP worm gearboxes have earned a reputation to be an industry benchmark worldwide. Our success originated from our relentless get for top quality with state-of-the-art technology, all and will be offering worm gearboxes happen to be affordable prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and electric motor interfaces, would make the EP worm gearbox the default decision for the market. The helical-worm and the double-worm version, with or without the torque limiter, soon add up to the advantage, creating an extremely versatile drive system.
\nEP Worm gearboxes provide substantial torque with low quickness gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio compared to the helical gears. These worm reduction gears having screw type characteristics act like helical gears, but its helix angle is typically comparatively bigger) and its own body is normally quite lengthy in the axial direction. The gears in these gearboxes could be proper or left-handed depending upon the purpose.
\nMounting choice include universal housing, side flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or double), with torque arm or torque limiter.
\nWorm reduction gears features
\nPrinciples
\nA worm gear is a kind of interlocking gear composed of a good worm shaft and worm wheel. The worm is definitely shaped just like a screw and the worm wheel can be a kind of gear machined to get a tooth account with the same configuration.
\nThe operation of a worm gear is comparable with that of a bolt and nut. The principle is the same as a nut that is fixed to ensure that it cannot rotate and for that reason progresses in the axial direction when the bolt is definitely turned.
\nThe look of a worm gear is considered through the relationship between your rack and spur gear on the middle plane of the worm wheel.
\nFeatures
\nSubstantial reduction ratio\tOne rotation of the worm rotates the worm wheel by one tooth. Due to this, in a 1 speed reduction gears, the wheel could be manufactured so that it will be rotated 1\/60 (1\/120 in particular applications).
\nOrthogonal shaft\tThe shafts are aligned orthogonally because of the structure. This characteristic makes it possible to layout the turning tranny direction at a right angle.
\nThe arbitrariness of the rotation direction\tThe screw direction of the worm can be clockwise or counterclockwise (generally clockwise). You’ll be able to change the rotation path of the worm wheel by changing the screw path.
\nA wide variety of shaft layouts\tThe wide variety of shaft layouts is among the features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., incorporate for a total of 14 types (Physique 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
\nLow noise, low vibration\tThe interlocking of the worm and worm wheel is definitely characteristic since the contact is certainly linear and the relative slide is fantastic. In comparison to rolling power transmission, noise and vibration are really low. For this reason, this technology can be used to drive medical gear, elevators and escalators, etc.
\nThe primary specifications of worm reduction gears
\nMA Series(Small)
\nCenter distance(mm)\t32,40
\nReduction ratio\t10,20,30,40,50,60
\nInput capacity(kW)\t0.1\uff5e1(at an input of 1800 rpm)
\nOutput torque(N\u30fbm)\t20\uff5e66
\nInput speed(rpm)\t0\uff5e1800
\nMA Series(Medium)
\nCenter distance(mm)\t50,63,80,100,125,140,160
\nReduction ratio\t10,15,20,25,30,40,50,60
\nInput capacity(kW)\t0.4\uff5e30(at an input of 1800 rpm)
\nOutput torque(N\u30fbm)\t900\uff5e3570
\nInput speed(rpm)\t0\uff5e1800
\nS Series
\nCenter distance(mm)\t50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
\nReduction ratio\t10,15,20,25,30,40,50,60
\nInput capacity(kW)\t0.3\uff5e255(at an input of 1800 rpm)
\nOutput torque(N\u30fbm)\t50\uff5e56600
\nInput speed(rpm)\t0\uff5e1800
\nKey points when selecting a worm reduction gears
\nSelection
\nWhen choosing a worm reduction gears, the procedures for selecting the correct gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in essential areas such as for example selecting the strain index, calculating the overhang load and examining the heat rated ability from the manufacturer.
\nCautions during use
\nWhen utilizing a worm lowering gears, heat produced during the initial period of use is large and running-in procedure at 1\/4, 1\/2 and 3\/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm decrease gears.
\nMaintenance and inspection
\nAfter completing running-in operation (approximately 50 hours), it’s important to improve the lubricating oil and to change the lubricating oil after that about 1 time per year according to the procedure manual offered by the manufacturer.
\nProduct Description
\nThe Worm Reduction Gear Box is supplied by our company is of high-quality. Our products are made by using premium quality materials and enhance technology at our vendors end. These are widely used in various sectors. Our goods are easily available at an extremely low market prices.
\nMotor Mount Frame Options
\nTEC Motors, worm decrease gearbox.
\nOption A good-160 B5 Framework, Flange Mount.
\nChoice B-132 B14 Frame, Face Mount.
\nOption C-100\/112 B5 Frame, Flange Attach.
\nHigh efficiency and safe operation. High load capability and overload functions. Result Torque = (Electricity (kW) x 9550 (Regular))\/ Gearbox output speed (rpm).
\nHigher ratios available on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
\nDESCRIPTION
\nWormgears of the VF series are actually milestones for the industry worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is distributed by the wide selection of several installation options, shaft configurations and engine interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating a highly versatile drive system.
\nADDITIONAL INFORMATION
\nAMP
\n0.42 A
\nEFFICIENCY
\n84%
\nHP
\n0.12
\nKW
\n0.09
\nRATIO
\n7
\nRPM
\n200
\nTEMPERATURE RATING
\n20 level C TO 80 level C
\nTORQUE
\n4 Nm
\nHSN
\n8483.40.00
\nWARRANTY PERIOD
\n12 Months
\nThe worm reduction gears come in two series: X and H.
\nThe series X, featuring a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
\nVersion XF (bell casing + coupling) provides great versatility to suit a broad range of applications and provides higher efficiency compared to the compact collection XC, where in fact the emphasis is on space efficiency.
\nSeries H supplies the same features since series X with an added plus: a spur gear pre-stage at the input end provides higher functionality and a good broader selection of ratios compared to the X series.
\nBody sizes 110 and 90 include a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy metal and ground-finished.
\nThe worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
\nBroad range of possibilities:
\nsecond input, result flange, single or double extension result shaft, torque limiter with through cable, torque arm.<\/p>","protected":false},"excerpt":{"rendered":"
worm reduction Our regular 700 Series – the heart of EP swiftness reducer products – has been serving industry reliably for over 10 years. Its proven modular style has set the sector standard for efficiency and is the most imitated merchandise in today’s worm gear acceleration reducer marketplace. But why settle for a knock-off when […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-636","post","type-post","status-publish","format-standard","hentry","category-worm-reducer"],"_links":{"self":[{"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/posts\/636","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/comments?post=636"}],"version-history":[{"count":1,"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/posts\/636\/revisions"}],"predecessor-version":[{"id":637,"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/posts\/636\/revisions\/637"}],"wp:attachment":[{"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/media?parent=636"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/categories?post=636"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-reducer.top\/nl\/wp-json\/wp\/v2\/tags?post=636"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}